SCA Roof Rack System

IMPORTANT NOTE - SHOULD BE FITTED BY A SPECIALIST - YOU WILL NEED TO DRILL THE ROOF AND IT SHOULD BE PREPARED BEFORE PUTTING THE BOLTS IN I.E ACTIVATOR, PRIMER & SEALER TO PREVENT ANY WATER INGRESS TO THE SHELL - THUS AVOIDING IMPACTING YOUR WARRANTY.

Affixed into the external top gutter channel of the roof.

The bolts feature on the underside of the outside edge before the canvas, so no risks of leaks.

TUV approved across the SCA roof range.

Maximum TUV tested roof load 50KG over two cross bars.

English Instructions Included.

The rails are available in one single length for  Long Wheel Base Vans, please reduce length with hacksaw for SWB vans.

There are a number of different length and widths of SCA roofs so now we only supply the longest length, with one length bolt which also may need trimming off depending on the depth of the roof.

Complete with fixing kit.

NOTE DOES NOT INCLUDE THE CROSS BARS.

The cross bars recommended are from Karitek.

Karitek have in conjunction with Banwy SCA developed a specific fitting kit for the cross bars to go into the SCA roof rack.

Or the Thule Wing Bar System is also a preferred option, more expensive but visually more appealing.

For Thule please order from PF Jones: 01782 574900

The part numbers that you will need are: Thule 3084 fitting kit, 753 foot pack, 969200 black wing bar  or 969100 silver wing bar for Transporter OR Vehicles using upto 127CM. Transit or new Vivaro are wider So need part no. 711520 UP TO 150CM BAR.