RIB 120 Seats

RIB 120 Seats - 2 Seats

RIB 120 Seats - 2 Seats

Availability: In stock


RIB 120 Seats - 2 Seats

RIB 120 Vinyl Black / Rear Black Enduro Fixed + ISOFIX - INSTOCK

£2,292.00
RIB 120 Seats - 2 Seats

RIB 120 Bricks Fixed + ISOFIX - INSTOCK

£2,329.20
RIB 120 Seats - 2 Seats

RIB 120 Black Fabric Fixed + ISOFIX - LOW STOCK

£2,340.00
RIB 120 Seats - 2 Seats

RIB 120 Vinyl Black / Rear Black Enduro Fixed + ISOFIX - WITH SHORT BACK 58CM - LAST ONE

£2,364.00
Description

Details

RIB 120 Seats - In Stock & More Due In

120cm -  Becoming a popular option for those that want a 2 seater with a bit more room ideal for Transit Customs etc.

120 Bed specifics:

  • 120 Wide - 2 seater
  • Standard rear back length of 65cm - affording a 6ft bed.
  • 340mm Arch Height, 200mm Offset
  • ISOFIX as standard
  • Integrated head rests, and belts
  • Rear corner cutout

For most of our other seats the standard Banwy height of the frame is 330mm for standard frame with 160mm offset

However for the the 120 we use generic height/offset of 200mm and height 340mm this allows the seat to be used in a wider variety of vehicles including the Transit, Transporter, Trafic, Vivaro.

Fabric Options In Stock:

  1. Simora - T6 fabric used from 2015+ on Highline vans, Titanium outer panels and Simora centre panels
  2. Bricks - T6.1 fabric used on Highline van, Titanium outer panels and Bricks centre panels
  3. Black Vinyl - Black Vinyl Outers, Headrest  & Centre Panels, the rear is Enduro in Black.
  4. Black Noir - Automotive fabric in Black Noir all over - Compliments lots of automotive fabrics e.g. Trafic, VW, Merc.
  5. Unupholstered - ready for a trimmer to do the fabric - Check first that they have a template though!

- Standard Fixed Frame - Most common option in the UK, and still allows room underneath for a porta potti

Isofix:

- Available as standard with Isofix to 2 seat places. Popular with Families, Grandparents & Rental Campers.

Please read this blog on Isofix

Mattress:

- Standard Mattress


Seat Length:

- Standard Back - standard seat length of the back is 65cm - this is the length of all our stock beds.

Frame Heights & Offset:

- The standard Banwy height of the frame for 120s is 340mm for use across the range of Transporters and Transit Customs
- The standard offset we use is 200mm to avoid the arch, with a corner cushion cutout that will work with the Transit and Transporters 

IF YOU WANT SOMETHING DIFFERENT THEN PLEASE SEE  OUR MADE TO ORDER BEDS AND ALLOW APPROX 12 WEEKS

All stock beds are sent via Pallet Track unless we have a Banwy delivery van in your area. Typical delivery time is 48 hours, or a little longer for domestic addresses as these are always called by the depot before delivering to prevent failed deliveries

NOTE FAILED DELVIERIES COST THE WHOLE PALLET RATE AGAIN OF £70

Reviews
Certificates & Fitting Guides